6 replies to this topic

[nedstar]

I need firmware for my Sawee Pad Infotmic.
After long time not use it refuse to startup and it also lost its recovery image.
I try 4 different images witch can let my pad startup but without many functions.
So I need the right image, who can help me out here, see the specs of my pad below;

SAWEE PAD 10A

Device
Brand: generic
Manufacturer: unknown
Model: wwe10
CPU Hardware: IMAPX200 (volgens de doos en ander prog (platform IMAPX210) - 1 GHz)
CPU: ARM v6-compatible processor rev 5 (v6l)
CPU-ABI: armeabi
RAM: DDRII 256MB

OS
VERSION: ERE27
RELEASE: 2.1-update1 V2.6:#3682
KERNEL: 2.6.32.9
SDK: 7
FIRMWARE: eng.infotm-sqa-desktop #78 (20110315.142804)
firmware 2.1-update 1 V2.6:#3682

DISPLAY
DIMENSIONS: 1024x600
DENSITY: Medium (160 dpi)
LOGICAL DENSITY: 1.0
DPI X: 159.5681
DPI Y: 160.42105

By StartUp; It shows on the right side under screen 6.3.2.(677)

Edited by nedstar, 21 February 2012 - 04:02 AM.

[Sponsored Links]

• Back to top

[pullenshawn]

I can offer what I used. Deb-r2.1.1170 build finally worked for me after trying 20 other builds that did not work on my SAWEE pad. you try these at your own risk but once I get it working it works very good. Much faster than before, only issue for me is I do not have the registration number for my pad since i did not document it before it went down.

Good luck!!

[nedstar]

pullenshawn, on 07 March 2012 - 08:49 AM, said:

I can offer what I used. Deb-r2.1.1170 build finally worked for me after trying 20 other builds that did not work on my SAWEE pad. you try these at your own risk but once I get it working it works very good. Much faster than before, only issue for me is I do not have the registration number for my pad since i did not document it before it went down.

Good luck!!

Thanks very much, can you show me how I can get this firmware (do you have a link for me).
Again many thanks, you can make my day.

[nedstar]

Problem solve, I made a combination of 2 different firmware to create 1 new firmware and it work's perfect, every thing on my tablet work's.
Later on I will make a complete package of this to offer for other members.

By the way, the firmware "Deb-r2.1.1170 build" did not work for my tablet.

[nedstar]

After a long time I not used my tablet, it refused to start up and it also lost its recovery image.
I try different kind of firmware but without result, some could start up my pad but lose some functions. Then I decided to build a new firmware package out of parts from other firmware and this I like to offer to other members with the same problem, see below how to do.

This is a good working firmware for SAWEE 10 also know as Rochy 10A (Infotmic based).
I tested on my tablet with outstanding result and all functions runs well.

Use the program “Win32DiskImager” on your Windows machine (no need install).
Tip: If you use Win32DiskImager be sure the image file is in the same directory (root of Win32DiskImager).

I use in my case a 4Gb SD card.

First write the image “flash10.1-android2.2” just to made a bootable SD card, then delete the map “android” from the SD card and replace it with the new “android” map.
Put the SD card in the upper SD slot (between the 2 USB slots”of the tablet and turn on the power, the firmware will flash automatic in you tablet.
Wait until you get the message remove SD card to boot, then remove the SD card and the tablet will reboot automatic.

(Original android version was 2.1, after flashing the new firmware it’s android 2.2)

That’s all.

Nedstar

See below the specs of my tablet.

SAWEE PAD 10A , also know as Rochy 10A

Device
Brand: generic
Manufacturer: unknown
Model: wwe10
CPU Hardware: IMAPX200 (volgens de doos en ander prog (platform IMAPX210) - 1 GHz)
CPU: ARM v6-compatible processor rev 5 (v6l)
CPU-ABI: armeabi
RAM: DDRII 256MB

OS
VERSION: ERE27
RELEASE: 2.1-update1 V2.6:#3682
KERNEL: 2.6.32.9
SDK: 7
FIRMWARE: eng.infotm-sqa-desktop #78 (20110315.142804)
firmware 2.1-update 1 V2.6:#3682

DISPLAY
DIMENSIONS: 1024x600
DENSITY: Medium (160 dpi)
LOGICAL DENSITY: 1.0
DPI X: 159.5681
DPI Y: 160.42105

By StartUp; It shows on the right side under screen 6.3.2.(677)


After finish, use the Image file “Restore_SDcard” and write it with Win32DiskImager to the sdcard because otherwise you can not get the original partition back. After this has been done, format the SD card patition back to normal FAT32 – 4096 bites.

Now your SD card is empty and back to normal with full space.

Here is the link of the whole package with firmware and description how to do;

Please Login HERE or Register HERE to see this link!

Keep in mind, it's only for the tablet with specification as I mention above.
I'm not responsible for use, please try at your own risk !

Good luck,

Nedstar

Edited by nedstar, 28 April 2012 - 01:22 AM.

[vwk2welker]

Well, good thread I have found today. Great discussion.

Please Login HERE or Register HERE to see this link!

,

Please Login HERE or Register HERE to see this link!

[Ja56cob]

Great discussion.