3 replies to this topic

[Sparkie]

Wondering if anyone has made there own programming cable like the one Team Black Hat was selling? I made my own from a thread over at XDA but I had a question before a tried to use it. Wondering if anyone could help??

thanks.

[Sponsored Links]

• Back to top

[Sparkie]

In the writeup he said "we're putting +5V DC on pin 4, and only 17 thousandths of an inch away is ground on pin 5".
The only open pin is next to a white wire which is negitive the ground is black and is on the other side. So I'm not sure if he got ground and negitive mixed up by accident or I have a wrong cable????

I can post a link if you want.
I also have pictures if anyone wants to see.

[Sparkie]

Are you not suppose to make your own cable? I can't get anybody to confirm my cable in three different fourms?

[SLCMotor]

Sparkie, on 18 March 2012 - 08:31 AM, said:

In the writeup he said "we're putting +5V DC on pin 4, and only 17 thousandths of an inch away is ground on pin 5".
The only open pin is next to a white wire which is negitive the ground is black and is on the other side. So I'm not sure if he got ground and negitive mixed up by accident or I have a wrong cable????

I can post a link if you want.
I also have pictures if anyone wants to see.

I made one and it works great. its not pretty but does the job.

• Strip down the end of your USB Mini/Micro so that the cables or circuit board is showing.
  
• Solder a wire from the red wire (pin 1) to the (pin 4)

Do at your own risk

Edited by SLCMotor, 31 March 2012 - 08:36 AM.