39 replies to this topic

[p3droid]

DISCLAIMER: This is an overclocking kernel. and will push your phone to the redline. By installing this kernel you agree that you assume full responsibility for anything that may happen.

There are multiple kernels here so pick which one fits you the best. Each of these include the following.

• Wifi tether support (Thanks to Dave and Chevy01)
  
• processor temperature monitoring support
  
• conversevative setting added for setCPU

You will need to purchase the setCPU program to utilize the overclocking features, by default the processor will run at 600 mhz.

The 1200 kernel has been test on 1.0.2 and 5.0.4 sprecovery version
8 slots - 250/600/700/800/900/1000/1100/1200

154 Short Benchmark
252 Long Benchmark
15+ Linpack

Pictures Below

Please Login HERE or Register HERE to see this link!

Please Login HERE or Register HERE to see this link!

Please Login HERE or Register HERE to see this link!

The 1100 kernel has been test on 1.0.2 and 5.0.4 sprecovery version

7 slots - 250/600/700/800/900/1000/1100

173 Short Benchmark
274 Long Benchmark
13.5 Linpack

Pictures Below

Please Login HERE or Register HERE to see this link!

Please Login HERE or Register HERE to see this link!

Please Login HERE or Register HERE to see this link!

scores are with JIT enabled

Attached Files

•  p3droid-1000-kous&.zip   2.76MB   67 downloads
•  p3droid-1100-krec&#.zip   2.81MB   84 downloads
•  p3droid-1200-krec&#.zip   2.81MB   215 downloads
•  P3Droid-Koush-110.zip   3.02MB   102 downloads
•  P3Droid-Koush-120.zip   3.02MB   169 downloads

Edited by p3droid, 20 March 2010 - 08:54 PM.

[Sponsored Links]

• Back to top

[roberj13]

Cannot get this to install, it starts to and then quits. Is there something I am missing?

[p3droid]

What rom are you running, and what recovery?

[roberj13]

ClockworkMod Recovery 1.6.9 and Koush's CyanogenMod 5.0.4.2. I put it on the sdcard and went to install zip from sdcard. clicked on the zip file and it starts working, but doesn't do anything. I also tried to rename it update.zip and apply sdcard:update.zip and that didn't work. That was with the 1.2 kernel. Trying the 1.1 now.

[deadhd5]

I am not getting anywhere near these linpack scores. I am getting 10.2 at the highest on the 1200mhz kernel. battery is much hotter than the one that came with the ROM. I don't think I am doing anything wrong here... any ideas?

[roberj13]

Yeah the 1.1 isn't working either. It says finding update package, opening update package, installing update package, then it goes back to the main recovery page.

[roberj13]

Im guessing that those linpack and short,long scores were with JIT enabled.

[p3droid]

@roberj13---there are two versions posted now, one that works on sprecovery and the other on clockwork.

Edited by p3droid, 15 March 2010 - 02:10 PM.

[roberj13]

Oh I see. Do you know, what makes the difference between what clockworkmod and SPRecovery will install. Trying to see if I can make some other kernels work as well.

[thebowers]

p3droid said:

@roberj13---those I uploaded work on sprecovery...check in a few minutes for clockworkrecovery updates

Thanks that clears up it not working on clockwork. Will wait for the update. Is it ok if I put the kernels as a attachment on your thread @ droidforums?

[p3droid]

thebowers, yes, I just don't go there very often.

[RoLa]

Will This by any chance help with the Cell standby and Phone idle?...

[thebowers]

Anyway to add a slot between 250 and 600? Would love a 400 for sleep standby or a min or 400.

[p3droid]

The bowers, that can be done quite easily, check back here later tonight.

[natediddy1120]

What up peoples lol

Just joined this forum....looks nice.

I'm downloading the 1200MHz kernel now :D

[thebowers]

Welcome nate so glad you could join!!

[natediddy1120]

Yeah I had heard of this from p3droid over at DF just never got around to joining....I like it though :)

If you all need help with anything let me know.

[BBCrackman]

natediddy1120 said:

Yeah I had heard of this from p3droid over at DF just never got around to joining....I like it though :)

If you all need help with anything let me know.

Hello nate, welcome to MyDroidWorld! We are glad to see you here and look forward to seeing you in the forums....

[natediddy1120]

BBCrackman said:

Hello nate, welcome to MyDroidWorld! We are glad to see you here and look forward to seeing you in the forums....

Thank you sir :)

Oh I love forums :D So I'm sure you will see me around quite a bit lol

[natediddy1120]

Thank you Chevy and p3droid for these kernels so much :) I have NEVER saw 15+ mflops on my Droid until today!!