Jump to content


Photo
- - - - -

Droid Charge Full Factory Tar, and Flashing Software


  • Please log in to reply
70 replies to this topic

#1 p3droid

p3droid

    Chief Of Staff

  • Administrators
  • 1,396 posts
  • Device:Motorola Droid

Posted 17 June 2011 - 08:23 AM

This is the first release from TeamBlackHat for the Droid Charge. Yeah !!!

The first file is a full tar that can be used to recover a phone or reset the phone to a factory state.

You will need 7z to unpack this tar.

File Download: CI510_VZW_ED1_ALL_ONE-LTE-CP_REV03_user_CL986330.tar.7z
File Md5: 9375107184ce56088b86f3d0cc798425
File Size: 359 MB (376,496,471 bytes)

Download: Download Now

Samsung Internal Flash Utility: Samsung PST

Download File: Download Now
This is windows only.
You must install everything in the zip file

How to use Samsung Flashing PST

1. Remove Sim Card

2. Set to Download Mode

a. Power Off → Hold VOL DWN while Press and Release PWR


3. Run Samsung PST and make sure the PST shows “Com port connected”

a. Select Software Tab.
b. Select "PDA+PHONE" for Software Download Option and Check “Boot update” option.
c. Click on “Open AP” and select file ”
d. Select Start
e. Wait until the message window is displayed and then click ok.
f. Device reboots.


4. If the Device bootloops , do a Factory Reset on the device.

Edited by p3droid, 18 July 2011 - 07:38 AM.

  • tclowdus and bangeko like this


> Register at MDW | MDW Rules and Guidelines <
Click the in a member's post to thank them for their post!


Remove Advertisements Sponsored Links

    MyDroidWorld.com



#2 anrichardson

anrichardson

    Junior Droid

  • Members
  • PipPipPip
  • 62 posts
  • Device:Moto Droid

Posted 17 June 2011 - 02:05 PM

Will software work for Galaxy Tab?
Dropbox, 2GB of free online space plus 250MB using this link http://bit.ly/9nsLgY

#3 p3droid

p3droid

    Chief Of Staff

  • Administrators
  • 1,396 posts
  • Device:Motorola Droid

Posted 17 June 2011 - 02:07 PM

nope, sorry. Will keep looking though.


> Register at MDW | MDW Rules and Guidelines <
Click the in a member's post to thank them for their post!


#4 kicker22004

kicker22004

    Junior Droid

  • Members
  • PipPip
  • 24 posts

Posted 17 June 2011 - 02:23 PM

Thanks man picking up the wife's charge today

#5 mikeinrichmond

mikeinrichmond

    Junior Droid

  • Members
  • PipPipPip
  • 31 posts
  • Device:Droid X

Posted 17 June 2011 - 02:44 PM

That's great news! Thanks for all the hard work on this!

#6 CatFishDom

CatFishDom

    MDW Noob

  • Members
  • PipPip
  • 14 posts
  • Device:Droid X

Posted 18 June 2011 - 01:05 PM

Do I need to disable voodoo lag fix first?

#7 NeaLMaN

NeaLMaN

    Junior Droid

  • VIP
  • 28 posts
  • Device:Galaxy Nexus

Posted 19 June 2011 - 05:24 PM

Thanks p3droid! Any idea when the charge will see gingerbread?

#8 Miami1683

Miami1683

    Droid

  • Super Moderators
  • 167 posts

Posted 19 June 2011 - 06:18 PM

Thanks p3droid! Any idea when the charge will see gingerbread?


I can say that GB is set to roll out shortly

#9 NeaLMaN

NeaLMaN

    Junior Droid

  • VIP
  • 28 posts
  • Device:Galaxy Nexus

Posted 21 June 2011 - 06:41 AM

That sir is the best news that I have heard in a while. Thanks for the info....just curious...do you have the charge now Miami1683?


I can say that GB is set to roll out shortly



#10 moosc

moosc

    Android Master

  • VIP
  • 1,658 posts
  • LocationCharlotte NC
  • Twitter:moosc
  • Device:DroidX on CM7, XOOM WITH HAMMERHEAD, DROID BIONIC ON STEROIDS 893..

Posted 21 June 2011 - 11:27 AM

very cool looks like I'm making smart choices for the Charge!

Sent from my DROIDX using Tapatalk

#11 happy!

happy!

    MDW Noob

  • Members
  • Pip
  • 1 posts
  • Device:Charge

Posted 21 June 2011 - 06:45 PM

Can someone break this down for a complete noob? I need this to restore my charge, but I cant seem to figure out how to get the Samsung PST to run.

#12 christo37

christo37

    MDW Noob

  • Members
  • Pip
  • 5 posts
  • Device:Samsung charge

Posted 21 June 2011 - 07:35 PM

i can help you i already did mine it was easy what problemm are you having

#13 edwinc11

edwinc11

    MDW Noob

  • Members
  • Pip
  • 1 posts

Posted 24 June 2011 - 10:05 PM

I cannot download the file for factory files. Can you put them again thanks

#14 tmc363

tmc363

    #blamecassy

  • Members
  • PipPipPip
  • 73 posts
  • Twitter:@TMC363
  • Device:DROID Razr Maxx

Posted 25 June 2011 - 07:39 AM

what is the difference in this utility and using odin?

#15 xolimit

xolimit

    MDW Noob

  • Members
  • Pip
  • 1 posts
  • Device:Samsung Charge

Posted 25 June 2011 - 11:47 AM

I was previously on;

Clockwork CWM Mod
PeanutButta Jelly Time
ee4_debloated-v421 (voodoo fix)

My Phone versions were;

Hardware Version
i510.06

Model Number
SCH-I510

Firmware Version
2.2.1

Baseband Version
i510.06 V.EE4
SCH-I510.EE1

Kernel Version
2.6.32.9
imnuts virtualbox #1

Build Number
SCH-I510.EE4

After flashing with this utility using the provided file my phone was successfully flashed to the following version;

Hardware Version
i510.06

Model Number
SCH-I510

Firmware Version
2.2.1

Baseband Version
i510.06 V.ED1
SCH-I510.ED1

Kernel Version
2.6.32.9
se.infra SEI-28 #1

Build Number
SCH-I510.ED1

I then received a notification for the Over The Air (OTA) update to EE4. I performed the update here are my current versions;

Hardware Version
i510.06

Model Number
SCH-I510

Firmware Version
2.2.1

Baseband Version
i510.06 V.EE4
SCH-I510.EE1

Kernel Version
2.6.32.9
se.infra SEI-07 #1

Build Number
SCH-I510.EE4

The verizon apps are all there, the recovery rom is there, shutdown sound is there.

The only issue i have is a mysterious Verizon Mobile CD Drive showing up on my PC when the phone is connected (Please see picture below).



I believe this drive didn't exist prior to flashing and i was wondering if anyone knew how to get rid of it.

I wanted my phone to be fully fully stock the way verizon gives it to you so i can take it back to the store as if nothing ever happened.

Appreciate the help

Thank you,
Rick

Attached Files



#16 jlank

jlank

    Junior Droid

  • Members
  • PipPip
  • 23 posts
  • Twitter:jlankford3336
  • Device:Samsung Galaxy Nexus

Posted 28 June 2011 - 08:49 AM

Does the TBH app work with the charge?

Thanks

#17 BrianTX

BrianTX

    Junior Droid

  • Members
  • PipPip
  • 13 posts
  • Twitter:@boosted3bar
  • Device:Droid Charge &amp; Droid X

Posted 28 June 2011 - 09:24 AM

Does the TBH app work with the charge?

Thanks


It's working for me

#18 lonndoggi

lonndoggi

    MDW Noob

  • Members
  • Pip
  • 6 posts
  • Device:OG DROID, DROID Charge

Posted 28 June 2011 - 11:40 AM

Samsung Internal Flash Utility: Samsung PST
...
You must install everything in the zip file

A lot of stuff, potentially:

1. PST DLL:
  SamsungPST SCH-I510 For Verizon ver.1.0.010:
    SamsungPST SCH-I510 For Verizon.msi

  SamsungPSTLite FW Setup1.0.004_MSI1ndEdition:
    instmsiw.exe
    ISScript10.Msi
    SamsungPSTLite.msi
    setup.exe

2.USB Driver:
  SAMSUNG_USB_Driver_for_Mobile_Phones_v1.3.1900.0.exe
  VIA USB Drivers 2.3.5.WithMux (32-Bit).msi

So, all of those exe's and msi's? Any particular order?

Edited by lonndoggi, 28 June 2011 - 11:42 AM.
Formatting...

  • tinktink480 likes this

#19 robrowald

robrowald

    Junior Droid

  • Members
  • PipPipPip
  • 30 posts
  • Twitter:http://twitter.com/robtheitguy
  • Device:Samsung Charge

Posted 28 June 2011 - 12:31 PM

so PST is just sitting at GetProcAddress Loading OK!
it has been here for 15 minutes
Is it safe to disconnect my phone and try again?

#20 lonndoggi

lonndoggi

    MDW Noob

  • Members
  • Pip
  • 6 posts
  • Device:OG DROID, DROID Charge

Posted 28 June 2011 - 01:41 PM

so PST is just sitting at GetProcAddress Loading OK!
it has been here for 15 minutes
Is it safe to disconnect my phone and try again?

Same here...
EDIT:
So I did disconnect, killed PSTLite, and started over. This time pulled the battery from my phone first, then plugged in the USB cable, then clicked on the vol-down. The yellow triangle appeared immediately.

Put the battery back in, started PST Lite, did everything else to set up as before and started.

This time, after the GetProcAddress Loading OK!, it started transfering. I'm at 54% as I type. So yeah, give that a try, robowald.

Edited by lonndoggi, 28 June 2011 - 01:54 PM.
Update





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users