Droid Charge Full Factory Tar, and Flashing Software
28 November 2011 - 07:49 PM
Make sure you are using odin to flash not the Samsung pdt also the phone must be in download mode you do this by tiring off the phone plug usb in the computer while pluging into the phone press the volume down hope this help I know the full factory tar works it only works on odin though
I tried flashing with the md5 listed as well as other areas to download. It says invalid hash file. What am I doing wrong? And is there a total noob guide to this?
29 December 2012 - 08:49 PM
Can you repost the link for the CI510 VZW
This is the first release from TeamBlackHat for the Droid Charge. Yeah !!!
The first file is a full tar that can be used to recover a phone or reset the phone to a factory state.
You will need 7z to unpack this tar.
File Download: CI510_VZW_ED1_ALL_ONE-LTE-CP_REV03_user_CL986330.tar.7z
File Md5: 9375107184ce56088b86f3d0cc798425
File Size: 359 MB (376,496,471 bytes)
Samsung Internal Flash Utility: Samsung PST
This is windows only.
You must install everything in the zip file
How to use Samsung Flashing PST
1. Remove Sim Card
2. Set to Download Mode
[INDENT]a. Power Off → Hold VOL DWN while Press and Release PWR[/INDENT]
3. Run Samsung PST and make sure the PST shows “Com port connected”
[INDENT]a. Select Software Tab.
b. Select "PDA+PHONE" for Software Download Option and Check “Boot update” option.
c. Click on “Open AP” and select file ”
d. Select Start
e. Wait until the message window is displayed and then click ok.
f. Device reboots.[/INDENT]
4. If the Device bootloops , do a Factory Reset on the device.